|
Ingear Limited |
---|
Wheel Protector can be used on non laquered wheels.
It is safe to use Clean Wheels and Custom Wheel Cleaner on painted wheels, provided they are in good condition and you pay attention to the label on the rear of the bottle before starting work.
Clean Wheels will not necessarily strip High Definition Wax from wheels, but will be detrimental to the durability of the wax. If you have High Definition Wax on wheels they will be easier to keep clean, wash with Bodywork Shampoo Conditioner instead, the dirt will be removed much more easily.
Custom Wheel Cleaner would be the best option for your powder coated wheels.
Custom Wheel Cleaner cannot be used on split rims.
Custom Wheel Cleaner Kit is suitable for use on vehicles with ceramic disc brakes.
You can use Super Resin Polish on the rust spots to remove any build up, but this is not a long term solution and proper rust prevention advice should be sought from specialists in that field.
Wheel Protector has been formulated to last for up to 6 weeks depending on weather and driving conditions.
We have replaced Alloy Wheel Seal with Wheel Protector. This is a new formulation using a different technology which offers a super hydrophobic (water repellant) film that stops dirt particles sticking to the surface. Wheel Protector will protect your wheels for up to 6 weeks where as Alloy Wheel Seal would only protect your wheels for up to 2 weeks.
This depends on the size of your wheels however on average the 300ml can contains enough product to protect 16 wheels. This means that if you treat your wheels once every 6 weeks the can will last for up to 6 months
Wheel Protector is not suitable for mirrored surfaces. As an alternative try using High Definition Wax.
Wheel protector can be used on non mirrored diamond cut wheels however it is not suitable for mirrored finishes.
Wheel protector can be used on multiple spoked wheels providing the spokes are not a mirrored finish.
Wheel protector should not be sprayed directly onto ceramic brakes however a small amount of overspray will not cause any harm.
Wheel Protector is not suitable for dark coloured matte effect wheel surfaces. It can be used on light colours such as silver and light grey matte effects.
Although Wheel Protector should not be applied directly to brake discs, a small amount of over spray will not cause any harm.
Using a wheel cleaner such as Clean Wheels or Custom Wheel Cleaner and agitation with a brush or spnge will remove Wheel Protector.
If Wheel Protector is accidentally over sprayed onto paintwork, simply wipe this away from the paintwork with a microfibre cloth before it dries.